Carey, Stephanie
VA Amputation System of Care
Crane, Nathan
High Yield Self Assembly of Nanostructured Materials into Functional Thermoelectric Devices
Large Stroke Microscale Actuators Based on Electrowetting
Dubey, Rajiv
Development of an Undergraduate Engineering Course: Introduction to Bioastronautics
Human Upper Body Modeling and Simulation in Space Conditions for Astronaut Training
Maximizing Manipulation Capabilities of Persons with Disabilities Using a Smart Wheelchair-Mounted Robotic System
Amount: $1,498,927
Co-PI:
Rehabilitation Engineering and Technology Program
University of South Florida (USF) Virtual Reality and Robotics
Gallant, Nathan
CAREER: Combinatorial Biomaterials for Endothelial Cell Mechanobiology
Guldiken, Rasim
A Novel, Low Cost, Ultra Sensitive Nanosensor for Early Detection of Ovarian Cancer
EAGER: A Surface Acoustic Wave Device for High-Resolution Atherosclerotic Plaque Inspection
Kumar, Ashok
Center for Nanobiotechnology Research (CNBR)
Crack Detection in Solar Cells and Ceramic Wafers
GOALI/Collaborative Research: Interface Engineered Diamond Coatings
for Dry Machining
Reed, Kyle
Curved-Bottom Shoe for Gait Symmetry Testing
Volinsky, Alexei
Applied Materials Research Fund
International US-Germany Joint Study Of X-Ray Optics Thermomechanical Stability And Control
Wilkinson, Stuart
Development of the Angel Hands Patient Lift System
Carey, Stephanie
Assistance in Developing Processes of Care in Regional Amputation Centers and Polytrauma Amputation Network Sites
Crane, Nathan
High Yield Self Assembly of Nanostructured Materials into Functional Thermoelectric Devices
Preliminary Investigation of Controlling Curvature of a Liquid Surface
Dubey, Rajiv
Capstone Design and Rehabilitation Engineering at the University of South Florida
Development of a Simulation Tool for Upper Extremity Prostheses
Develop a prototype to address upper extremity motion disorders on individuals with neurological conditions such as Parkinsonian and Essential Tumor
Maximizing Manipulation Capabilities of Persons with Disabilities Using a Smart Wheelchair-Mounted Robotic System
Rehabilitation Engineering and Technology Program
Amount: $1,498,927
Co-PI:
Rehabilitation Engineering and Technology Program
Technology and Assessment of Drive-by-Wire Systems: Safe Driving Project-Quality of Life Technology Center
Gallant, Nathan
CAREER: Combinatorial Biomaterials for Endothelial Cell Mechanobiology
Guldiken, Rasim
A Novel, Low Cost, Ultra Sensitive Nanosensor for Early Detection of Ovarian Cancer
Kumar, Ashok
Center for Nanobiotechnology Research (CNBR)
Crack Detection in Solar Cells and Ceramic Wafers
Engineering and Computer Science Scholars Targeted for Academic, Retention and Success (STARS) at the University of South Florida
GOALI/Collaborative Research: Interface Engineered Diamond Coatings for Dry Machining
Interface Engineered Diamond Coatings for Dry Machining
Novel Nano-hybrid Structured Regioregular Polyhexylthiophenes Blend Films for Organic Photovoltaic Applications
Rapid: Novel Functionalized Nanomaterials for Effective Remediation of Spilled Oil Contaminants in the Gulf of Mexico
Lusk, Craig
CAREER: Design for Integrity in Shape-Shifting Surfaces
Uncertainty Quantification for the Kinematic Approach to Compliant Mechanism Design
Reed, Kyle
Gait Enhancing Mobile Shoe for Rehabilitation
Volinsky, Alexei
International US-Germany Joint Study Of X-Ray Optics Thermomechanical Stability And Control
Carey,Stephanie
Upper Extremity Prostheses Testing
Crane,Nathan
Measuring the Force of Corrosion: A Novel Technique for Corrosion Studies in a Microfluidic
Environment
Amount: $136,956
Co-PI:
Nolas, George
High Yield Self Assembly of Nanostructured Materials into Functional Thermoelectric Devices
Dekker,Don
A Synergistic Project to Develop Infrastructure to Test and Develop Innovative Rehabilitation
Technologies
Dubey,Rajiv
Maximizing Manipulation Capabilities of Persons with Disabilities Using a Smart
Wheelchair-Mounted Robotic System
Amount: $1,459,131
Co-PI:
Wright, Tennyson
Rehabilitation Engineering and Technology Program
Analysis, Evaluation and Modification of Vibrotactile Balance Prosthesis
Amount: $24,991
Co-PI:
Delaurentis,Kathryn
Sundarrao,Stephen
Capstone Design and Rehabilitation Engineering at the University of South Florida
Amount: $49,440
Co-PI:
Alqasemi,Redwan
Middle East Robotics Research Collaboration Planning
Amount: $315,454
Co-PI:
Alqasemi,Redwan
Service Contract for Academic and Scientific Collaboration
Durham,Delcie
SGER: Exploring Sustainable Engineering Design Metrics Through Cell Biology Analogy
Hess,Daniel
Kaw,Autar
Amount: $138,595
Co-PI:
Coovert,Sally
Yalcin, Ali
Holistic Numerical Methods: Unabridged
Kumar,Ashok
GOALI: Study of Reliability and Modeling for Process Optimization and Yield Improvements in
Chemical Mechanical Planarization
Center for Nanobiotechnology Research (CNBR)
Amount: $206,090
Co-PI:
Reeves,Kingsley
Thomas,Sylvia
Engineering and Computer Science Scholars Targeted for Academic, Retention and Success
(STARS) at the University of South Florida
Amount: $92,717
Co-PI:
Durham,Delcie
GOALI/Collaborative Research: Interface Engineered Diamond Coatings for Dry Machining
NationalScience Foundation
Amount: $478,800
Co-PI:
Batzill,Matthias
Gupta,Vinay
Li, Xiao
Schlaf, Rudiger
MRI: Acquisition of an Ultrahigh Analytical Thermal Field Emission Scanning Electron Microscope for Research and Education
Growth of the Metal Oxide Nanowires Using VLS Method
Spatially Resolved Swept Laser Spectroscopic System for Gold Nanoparticle Sensing
Nanowires Based Technologies for Biotoxin Detection
Lusk, Craig
Amount: $144,006
Co-PI:
Volinsky, Alexei
Uncertainty Quantification for the Kinematic Approach to Compliant Mechanism Design
Volinsky, Alexei
International US-Germany Joint Study of X-Ray Optics Thermomechanical Stability and Control
Wilkinson, Stuart
Comparative Testing of Radiography Manual Ultrasonic Testing and Advanced Ultrasonic Systems in Accordance with AWS D1.5 Bridge Welding Code
Carey, Stephanie
Amount: $15,000
Co-PI:
Dubey, Rajiv
Upper Limb Prosthesis and Amputee Tool Kit
Crane, Nathan
Measuring the Force of Corrosion: A Novel Technique for Corrosion Studies in a Microfluidic
Environment
Dubey, Rajiv
Maximizing Manipulation Capabilities of Persons with Disabilities Using a Smart
Wheelchair-Mounted Robotic System
Amount: $50,000
Co-PI:
Sundarrao, Stephen
Technology and Assessment of Drive-by-Wire Systems: Safe Driving Project-Quality of Life
Technology Center
Amount: $1,459,131
Co-PI:
Wright, Tennyson
Rehabilitation Engineering and Technology Program
Durham, Delcie
SGER: Exploring Sustainable Engineering Design Metrics Through Cell Biology Analogy
Kaw, Autar
Amount: $149,400
Co-PI:
Coovert, Sally
Hess, Melinda
Holistic Numerical Methods: Unabridged
Collaborative Research: Development of New Prototype Tools, and Adaptation and
Implementation of Current Resources for a Course in Numerical Methods
Kumar, Ashok
GOALI: Study of Reliability and Modeling for Process Optimization and Yield Improvements in
Chemical Mechanical Planarization
Center for Nanobiotechnology Research (CNBR)
Amount: $185,177
Co-PI:
Batson, Bernard
Reeves, Kingsley
Thomas, Sylvia
Engineering and Computer Science Scholars Targeted for Academic, Retention and Success
(STARS) at the University of South Florida
Volinsky, Alexei
Experimental and Computational Investigation of Fracture Patterns in Thin Films and Multilayers
Wilkinson, Stuart
Developing and Instrumenting a Test Vehicle Mock-up
Dubey, Rajiv
Maximizing Manipulation Capabilities of Persons with Disabilities Using a Smart
Wheelchair-Mounted Robotic System
Amount: $1,389,364
Co-PI:
Rehabilitation Engineering and Technology Program
Amount: $50,000
Co-PI:
Sundarrao, Stephen
Technology and Assessment of Drive-by-Wire Systems
Kaw, Autar
Amount: $212,194
Co-PI:
Coovert, Sally
Hess, Melinda
Holistic Numerical Methods: Unabridged
Kumar, Ashok
Center for Nanobiotechnology Research (CNBR)
GOALI: Study of Reliability and Modeling for Process Optimization and Yield
Improvements in Chemical Mechanical Planarization
Amount: $95,810
Co-PI:
Bhansali, Shekhar
Weller, Thomas
NIRT: Synthesis and Applications of Nanocrystalline Diamond Films for
MEMS/Biomedical Applications
Thin Film Diamond for Thermal Management of High Power Devices
Rahman, Muhammad
Amount: $7,739
Co-PI:
Katkoori, Srinivas
Modeling and Design of a MEMS Micropump
Volinsky, Alexei
Experimental and Computational Investigation of Fracture Patterns in Thin Films
and Multilayers